THIRDREALITY smartplug installation

The THIRDREALITY smartplug allows you to monitor and control connected devices through the EAGLE.  

To pair the smart plug to the EAGLE use the Rainge app:

1. Click "My Devices" to see your list of devices
2. Click "Add New" to bring up the Add Device form
3. Enter a name for the device.
4. Select "ThirdReality" from the "Make" dropdown list
5. Select "3RSP02028BZ" from the "Model" dropdown list
6. Look on the back of the plug.  There will be "Mac:" followed by 12 characters.  To convert this to the MAC ID, insert "FFFE" between the 7th and 8th characters.  For example: 1234567890AB => 1234567FFFE890AB.  Enter the resulting 16 characters as the MAC ID.
7. Select what type of appliance is plugged into the outlet (i.e. fan, air conditioner).
8. Click "Add device"
9. Plug in the smartplug and press the button on the side until the LED on the front of the plug flashes.
10. Give it up to 30 minutes to pair and you should be all set.